|
3m spary adhesive with edge staples.I thought it thru and looked at my older factory amps as guides,made a paper pattern for tolex layout and cutout.I tried 3 different paper combinations till I found a combination that I liked and looked professional.Then and only then cut tolex sprayed 3m,let air dry a few minutes and began pulling,tugging and cussing,The spray adhesive gives you about 15 minutes working time,you can pull tolex up and restrech.Once you get it all worked out then I stapled the edges.I finished on the bottom of the cab with 1 peice over the top and both sides and about 2" into bottom.Finished with bottom piece with folded back edges and exposed brass antique tacks.Along these 2 finish lines on bottom I put the 4 rubber feet.The hardest thing is learning to do inside corners.Practice them 1st.As ussal please forgive my spelling!
|
|